Technical Specifications
Hardware Features
Processor
- Qualcomm 560MHz CPU, MIPS 74Kc
Memory
Interface
- 1 x 10/100Mbps Shielded Ethernet Port (LAN/POE)
- 1 x Reset Button
Power Supply
- Passive Power over Ethernet via LAN (+4,5pins; -7,8pins)
- Voltage range: 16-27VDC
Dimensions ( W x D x H )
- 350 x 255 x 207 mm (13.8 x 10.0 x 8.1 in.)
Antenna Gain
Antenna Beamwidth
- 7°(Azimuth), 10°(Elevation)
Protection
- 15KV ESD Protection
- 6KV Lightning Protection
Enclosure
- Material: Outdoor PC stabilised plastic
- Weatherproof: IP65 water and dust proof design
Wireless Features
Wireless Standards
Proprietary Protocol
- TDMA Mode (with Pharos MAXtream enabled)
Wireless Speeds
- Up to 150Mbps (40MHz,Dynamic)
- Up to 72.2Mbps (20MHz,Dynamic)
- Up to 36.1Mbps (10MHz,Dynamic)
- Up to 18.05Mbps (5MHz,Dynamic)
Frequency
Transmit Power
- Max. 23dBm (Adjustable power by 1dBm)
Software Features
IPv6
Network Configuration
- WAN: Static/Dynamic/PPPoE/L2TP/PPTP
- LAN: Static/Dynamic/DHCP
- Forwarding: ALG/UPnP/Virtual Server/Port Trigger
- Security: SPI Firewall/ Ping Forbidden/DoS Protection
- Access Control
- Static Routing
- Bandwidth Control
- IP & MAC Binding
Wireless Configurations
- Pharos MAXtream TDMA Technology
- Selectable Channel Width: 5/10/20/40MHz
- Auto Channel Selection
- Transmit Power Control
- Dynamic Frequency Selection(DFS)
- WDS Enable/Disable
- Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption,
- 64/128/152-bit WEP Encryption
- SSID Broadcast Enable/Disable
- Multi-SSID with VLAN Tagging(AP Mode only)
- Distance/ACK Timeout Setting
- Wireless MAC Address Filter
- Wireless Advanced:
- Beacon Interval/RTS Threshold/Fragmentation Threshold/DTIM Interval/AP Isolation/Short GI/WiFi Multimedia
Management
- Discovery and Remote Management via Pharos Control application
- HTTP/HTTPS Web-based management
- System log
- SNMP Agent(v2c)
- Ping Watch Dog
- Dynamic DDNS
- SSH Server
System Tools
- Indicators: Signal Strength/Noise/Transmit CCQ/CPU/Memory
- Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP
- Spectrum Analyser
- Speed Test
- Ping
- Traceroute
System-level Optimisations
- Optimised IGMP Snooping/Proxy for multicast applications
- Hardware watch dog
PoE Adapter Features
Dimensions (W x D x H)
Interfaces
- 1 x AC Jack with Earth Ground
- 1 x 10/100Mbps Shielded Ethernet Port (Power + Data)
- 1 x 10/100Mbps Shielded Ethernet Port (Data)
Button
Power Status LEDs
Input
Output
- 24VDC, 0.6A Max
- +4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet)
Efficiency
Certifications
- CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark
Others
Certification
System Requirements
- Microsoft Windows 98SE, NT, 2000, XP, Vista or Windows 10, Windows 8, Windows 7, MAC OS, NetWare, UNIX or Linux.
- Note: It's recommended you to use one of following Web browsers for an improved user experience: Google Chrome, Safari, and Firefox. IE browsers are not recommended.
Environment
- Operating Temperature: -40°C~70°C (-40°C~158°C)
- Storage Temperature: -40°C~70°C (-40°C~158°C)
- Operating Humidity: 10%~90% non-condensing
- Storage Humidity: 5%~95% non-condensing
Package Contents
- 1 x TP-Link CPE605 CPE Link
- 1 x 24V 0.5A Passive PoE adapter
- 1 x Set of pole mounting straps
- 1 x AC power cord
- 1 x Installation Guide