• Blustream Multicast Advanced Control Module for TCP / IP, RS-232 and IR control
  • ACM500 1

Blustream Multicast Advanced Control Module for TCP / IP, RS-232 and IR control

Product Ref: ACM500

Our UHD SDVoE Multicast distribution platform allows distribution of the highest-quality, un-compromised 4K with zero latency Audio/Video over copper or optical fibre 10GbE networks.

The ACM500 Control Module features advanced third party control of the SDVoE 10GbE Multicast system using TCP/IP, RS-232 and IR. The ACM500 includes a web interface module for control and configuration of the Multicast system and features 'drag and drop' source selection with video preview and independent routing of IR, RS-232, USB / KVM, Audio and Video.

Pre-built Blustream product drivers simplify Multicast product installation and negate the need for an understanding of complex network infrastructures.

Box Contents

1 x ACM500
1 x IR Control Cable - 3.5mm to 3.5mm Cable
4 x Rubber Feet
1 x Mounting Kit

Technical Specifications

  • Ethernet Port: 2 x 1Gb LAN RJ45 connector (1x PoE support)

  • RS-232 Serial Port: 2 x 3-Pin Phoenix connector

  • I/O Port: 1 x 6-Pin Phoenix connector

  • IR Input Ports: 1 x 3.5mm stereo jack

  • PoE draw: 7.9W (typical), 8.4W (max load)

  • Product Upgrade: 1 x Micro USB, female

  • Dimensions (W x D x H): 190.4mm x 93mm x 25mm

  • Shipping Weight (Kit): 0.6kg

  • Operating Temperature: 32°F to 104°F (0°C to 40°C)

  • Storage Temperature: -4°F to 140°F (-20°C to 60°C)

  • Power Supply: PoE or 12V/1A DC

Product Features

  • Web interface module for configuration and control of the Blustream SDVoE 10GbE Multicast system

  • Intuitive 'drag & drop' source selection with video preview feature for active monitoring of system status

  • Advance signal management for independent routing of IR, RS-232, USB/KVM, audio and video

  • Auto system configuration

  • 2x RJ45 LAN connections to bridge existing network to Multicast video distribution network, resulting in:

    - Better system performance as network traffic is separated

    - No advanced network setup required

    - Independent IP address per LAN connection

    - Allows simplified TCP/IP control of Multicast system

  • Dual RS-232 ports for control of the Multicast system, or pass-through of control to remote third party devices

  • 5V/12V IR integration for control of Multicast system

  • PoE (Power over Ethernet) to power Blustream product from PoE switch

  • Local 12V power supply (optional) should Ethernet switch not support PoE

  • Support for iOS and Android App control

  • 3rd Party drivers available for all major control brands

This site uses cookies. By continuing your visit, you accept their use as set out in our Cookie Policy. OK