• CI Amp IA200-2C +Connect
  • IA2002C 1
  • IA2002C 2
  • IA2002C 3

CI Amp IA200-2C +Connect

Product Ref: IA2002C

The IA200-2C Installation Amplifier supplies up to 200 watts per channel at 4 ohms. As a Monitor Audio ‘Connect’ amplifier, it utilises our Connect IP interface, a web application which can be accessed by any device connected to the internet with a web browser on the same network.

A slim 1U rack height, it universally fits into most racks whilst delivering 93% energy efficiency. The IP control is via the RJ-45 input, controlling power On/Off, volume, muting, and input source selections. A visual match for the rest of the Monitor Audio Installation Amplifier line, the IA200-2C is ready for any project.

Technical Specifications

'Connect' IP Control

Yes

Channel Number

2 (1 Stereo Pair)

Power (W / Channel) | 4 ohms

200 W

Power (W / Channel) | 8 ohms

150 W

Power (W / Channel) | Bridge (8 ohms)

470 W (1CH)

Power (W / Channel) | 70V

N/A

Input Impedance

20 K ohms

Output Impedance (Loop RCA)

600 ohms

Input Sensitivity

100 mV / 1 W, 1230 mV – Full power

Maximum Input Voltage

2.9 V

Signal to Noise (SN:R)

-100 dB (20 Hz – 20 kHz)

Frequency Response

5 Hz – 50 kHz

Total Harmonic Distortion THD + N@1 KHz

0.03%

Rack Height

1U

Dimensions (Excluding Feet (H x W x D))

42.4 x 438 x 427 mm (111/16 x 171/4 x 1613/16")

Dimensions (Including Feet (H x W x D))

52.8 x 438 x 427 mm (21/16 x 171/4 x 1613/16")

Width (including rack brackets)

482 mm (19")

IP Communication

TCP/IP (RJ-45 10/100 Base T)

Mains Operating Voltage

100 – 120 V @ 60 Hz
220 – 240 V @ 50 Hz

Fuse Rating

5 A (T5AL ~ 250VAC)

Standby Power Consumption

<0.5 W (green mode)

Networked Standby Power Consumption

<2 W

Weight

5.3 kg (11 lb 10 oz)

Sold As

Single Unit

This site uses cookies. By continuing your visit, you accept their use as set out in our Cookie Policy. OK