Whyte Series 5 WM516 5 Wire 16-Way Multiswitch

Product Ref: 10003

The Whyte Series 5 Multiswitch range is universally flexible and is designed to be used in small, medium to large Integrated Reception Systems (IRS). Whyte Multiswitches can be used as Standalone Multiswitches when powered directly via the18V Auxiliary Input by using a Whyte 0.8A Power Supply Unit (model WPSU-0.8A).

Technical Specifications

Frequency Range:SAT 950-2150MHz | TERR 87-790MHz
4G/5G Switch:YES
Input (F-Type Female):4 SAT + 1 TERR
Tap Outputs (F-Type Female):16
Gain:SAT: ≥10dB | TERR:≥8dB
Gain Control:SAT 11dB±2dB | TERR 11dB±2dB
Return Loss SAT Trunk Input/Output:SAT >10dB/>10dB
TERR >8dB/8dB
Return Loss Tap Output:>8dB
Max Output Level:SAT (IMA³ -35dB) 100dBμV
TERR (IMA³ -60dB) >85dBμV
Isolation:Trunk - Trunk >33dB
Cross Polar: ≥25dB
Tap-Tap SAT >30dB
Tap-Tap TERR >30dB
Rejection ≥25dB
Impedance:75 Ohms
Switching Commands:Legacy 13/18V / 22kHz Tone
Power Supply Voltage:18V DC
Powering:Via DC Input / Via HL and HH Input
Auxiliary DC Output (F-Type Female:YES
Power Consumption (Max)@18V:210mA
Masthead Power Supply (Switchable):TERR Input Only 12V DC 100mA
Earth Terminal Bars (Tap Outputs):Fitted
Earth Lug:Up to 6mm² Core
Dimensions Incuding Earth Bars (mm):214 x 182 x 43
Weight:950g

Product Features

  • Inbuilt LTE filter
  • LED power indicator
  • Line Powered Multiswitch
  • Gain Control on all inputs
  • Comes with Earth Bars fitted
  • SAT gain 10dB / TERR gain 8dB
  • Colour coded inputs and outputs
  • Use as standalone when powered with a Whyte PSU
  • Uses the receiver power to reduce demands on system PSU
  • Adequate clearance to route cables under the Multiswitch
  • Use Whyte Series 5 Launch Amplifiers and Taps/Splitters to build large capacity IRS Systems

This site uses cookies. By continuing your visit, you accept their use as set out in our Cookie Policy. OK