Blustream IP Multicast UHD Video Transceiver over 10Gb Network

Product Ref: IP500UHD-TZ

The Blustream IP500UHD Transceiver is a SDVoE AV over IP solution that provides the highest-quality, un-compromised 18Gbps 4K with zero latency Audio/Video extension over copper or optical fibre 10Gb Managed Networks.

The IP500UHD-TZ includes support for HDMI 2.0 including distribution of HDR (High Dynamic Range), 10-bit colour content, and multi-channel HD audio signals.

Technical Specifications

  • Video input: 1 x HDMI Type A, female
  • Video output: 1 x HDMI Type A, female
  • Audio input/Output: 1 x 5-pin Phoenix connector
  • Ethernet port: 1 x 10GBaseT RJ45 Video network, 1 x SFP+ module video network, 1 x 1Gb LAN RJ45 pass-through
  • RS-232 serial port: 1 x 3-pin Phoenix connector
  • USB/KVM Port: 1 x USB-Type B (host) , 2x USB-Type A (device)
  • IR input: 1 x 3.5mm stereo jack
  • IR output: 1 x 3.5mm mono jack
  • PoE+ draw: 12.8W (typical), 13.5W (max load)
  • Dimensions (WxDxH): 191mm x 153mm x 25mm
  • Dimensions Including Connections (WxDxH): 191mm x 158mm x 25mm
  • Shipping Weight: 1kg
  • Operating Temperature: 32°F to 104°F (0°C to 40°C)
  • Storage Temperature : -4°F to 140°F (-20°C to 60°C)

Product Features

  • Advanced 18Gbps UHD Video over 10Gb Managed Network with visually lossless compression and zero latency
  • Supports HDMI 2.0 18Gbps specification with pass-through for up to 4K 60Hz 4:4:4, and with 10/12-bit HDR sources, including Dolby Vision
  • Transceiver can be configured as a point of transmission or a receiver as required
  • Supports video scaling and single-frame switching
  • Supports all known digital HDMI audio formats including Dolby TrueHD, Atmos, DTS-HD Master Audio and DTS:X transmissions
  • Support fixed signal routing function for IR, RS-232, CEC and USB
  • USB end-to-end / point-to-point pass-through
  • Analogue L/R audio embedding and audio breakout (balanced and unbalanced)
  • Bi-directional 10/100/1000BaseT Ethernet pass-through
  • Supports bi-directional 5V or 12V IR pass-through
  • PoE+ (Power over Ethernet) to power Blustream Multicast products from PoE+ switch
  • HDCP 2.2 compliant with advanced EDID management
  • Local 12V 2.5A power input (should Ethernet switch not support PoE+, PSU sold separately)
  • Features 4 operational modes:
    – Matrix distribution (requires 10Gb network switch)
    – Video wall (requires 10Gb network switch)
    – Multiview mode (requires 10Gb network switch)
    – One-to-one HDMI extender (no network switch required)

This site uses cookies. By continuing your visit, you accept their use as set out in our Cookie Policy. OK