Technical Specifications

Applicable Standards :ANSI/TIA-568.2-D, IEC11801, EN50173
Performance Standard ≤ 10.0m : Category 6A Component Tested
Performance Standard > 10.0m : Category 6A Channel Tested
Wiring Method : T568-B
Certified Data-rate : 10 Gbps (Gigabit ethernet)
Supported Data Rate : ≥ 10 Gbps (Gigabit ethernet)
Certified Bandwidth : 1 to 500 MHz
Supported Bandwidth : ≥ 500 Mhz

Construction

Conductors : Solid 28 AWG Oxygen-Free Stranded Copper
Conductor Insulation : Skinned Foam PE
Shielding : Individual pairs AL-Mylar shielded 100% Coverage
Cable Jacket Material : UL444 CMG fire-rated PVC Composite
Connector Material : Nylon Composite
Contact Material : Solid Oxygen-free Copper, 50µ” Gold-plated
Contact Type : 3-prong for solid or stranded conductors
Strain Relief : Injection-moulded PVC

Mechanical

Cable Diameter : 28 AWG 4.8mm | 0.19in Ø
Maximum cable pulling tension : 80kgf/cm2
Minimum recommended operational depth : 40.0mm | 1.57in
Cable Bend Radius : 20.0mm | 0.79in
Max. mating cycles : 1,000 cycles
Installation Temp range : 75°C
UL Temp rating : 75°C
Storage temp range : 75°C
Operating Temp range : 75°C

Electrical

Conductor Resistance : 223Ω/km
Insulation Resistance : 10MΩ min @ 100V DC
Characteristic Impedance : 100 Ω
Dielectric Strength : 500V AC / 1min

Product Features

‚Äč

Application Standards:
ANSI/TIA-568.2-D
IEC11801
EN50173
Performance Standard:
≤ 10.0m – Category 6A Component Tested
≥ 15.0m – Category 6A Channel Tested
Wiring method: T568-B
Certified Data Rate: 10 Gbps (Gigabit ethernet)
Supported Data Rate: ≥ 10 Gbps (Gigabit ethernet)
Certified Bandwidth: 1 to 500 MHz
Supported Bandwidth: ≥ 500 MHz

MECHANICAL

Cable Diameter: 28 AWG, 4.8mm/0.19ӯ
Maximum Cable Pulling Tension: 80 kgf/cm²
Cable to Plug Tensile Strength: TBC
Cable Bend Radius: 20.0mm | 0.79in
Recommended Total Mounting Depth: 40.0mm | 1.57in
Mating Cycles (max.): 1000 cycles
Temperature range: UL Temp rating – 75ºC

CONSTRUCTION

Conductors: Solid 28 AWG Oxygen-Free Stranded Copper
Conductor Insulation: Skinned Foam PE
Shielding: Individual pairs AL-Mylar shielded 100% Coverage
Cable Jacket Material: UL CMG-rated PVC Composite
Connector Material: Nylon Composite
Contact Material: Solid Oxygen-free Copper, 50μ” Gold-plated
Contact Type: 3-prong for solid/stranded conductors
Strain Relief: Injection-moulded PVC

ELECTRICAL CHARATERISTICS

Conductor Resistance: 223Ω/km
Insulation Resistance: 10MΩ min @100V DC

 

This site uses cookies. By continuing your visit, you accept their use as set out in our Cookie Policy. OK