Blustream 4-Way Simultaneous HDBaseT /HDMI2.0 Output Board- 4K 60Hz

Product Ref: PRO-OUT4HTCS

The PRO-OUT4HTCS output board offers 4 x dual HDBaseT™ outputs for connection to a HDBaseT™ receiver and HDMI display per zone.

The PRO-OUT4HTCS utilises CSC technology allowing support of HDMI 2.0 4K 60Hz 4:4:4 (18Gbps) HDCP 2.2 signal distribution up to lengths of 70m (1080p to 100m).

The PRO-OUT4HTCS features independent down-scaling of 4K video inputs on the CSC HDBaseT™ outputs to allow displays only capable of supporting lower video resolutions to receive 4K video while still showing maximum original 4K UHD resolution on the higher definition displays.

The PRO-OUT4HTCS also features quick release card module fittings allowing simple installation into the Custom Pro Matrix hub.

Technical Specifications

  • Video Output Connectors: 4 x HDBaseT™ RJ45 connector

  • Card Dimensions (W x H x D): 182mm x 22mm x 177mm

  • Dimensions Including Connections (W x H x D): 202mm x 22mm x 188mm

  • Shipping Weight: 0.5kg

  • Operating Temperature: 32°F to 104°F (0°C to 40°C)

  • Storage Temperature: -4°F to 140°F (-20°C to 60°C)

Product Features

  • Advanced HDBaseT™ technology offering distribution of video and audio over a single CAT cable

  • Features 4 x HDBaseT™ outputs for connection to compatible HDBaseT™ receivers

  • Advanced Colour Space Conversion (CSC) supports HDMI 2.0 18Gbps specification including HDR support

  • Supports 4K 60Hz 4:4:4 UHD video up to 70m*

  • Independent down-scaling of video input resolutions up to 4K 60Hz 4:4:4 to the following formats:

    – 1080p 60Hz (for screens that do not support 4K)

    – 4K 60Hz 4:2:0 (for screens that do not support full 4K 60Hz 4:4:4)

  • Extends HDMI 1080p video up to 100m

  • Supports all known HDMI audio formats including Dolby TrueHD, Atmos and DTS-HD Master Audio transmission

  • Supports PoC to power Blustream HDBaseT™ receivers

  • Quick release card module fittings allowing simple population of input and output cards in Custom Pro Matrix Hub

  • HDCP 2.2 Support

  • To be used with the HEX100CS-RX receivers

This site uses cookies. By continuing your visit, you accept their use as set out in our Cookie Policy. OK