Platinum In-Wall 3G Single

Product Ref: SCPP3GW

The Platinum In-Wall 3G is a three-way architectural In-Wall loudspeaker that features an MPD III tweeter, 4” RDT III midrange driver and twin 6" RDT III bass drivers. It can be used either horizontally or vertically anywhere within a high-performance home theatre or two-channel stereo system.

Platinum In-Wall 3G is Monitor Audio’s flagship high-performance, architectural, in-wall speaker. It is designed for use in high-end audio and movie systems, where accurate, clear and lifelike sound is required. With the minimum of room intrusion but with maximum scale and sonic impact.

Platinum In-Wall 3G can be installed either vertically or horizontally, which means it can be used on any channel within a system and is ideal for LCR applications and for seamless tonal accuracy within a theatre system.

Technical Specifications

System Format3 Way
Frequency Response, Free-Field (-6 dB)​41 Hz – 60 kHz
Frequency Response, In-Room (-6 dB)​27 Hz – 60 kHz
Sensitivity (2.83 Vrms @ 1 m, Free-Field)​​88 dB
Nominal Impedance4 Ohms
Minimum Impedance4.1 Ohms​ @ 1.6 kHz​
Continuous Power Handling​ ​(RMS into 4 Ohms, Pink Noise with 6 dB Crest Factor)300 W
Recommended Amplifier Power​ (RMS into 4 Ohm, Music Signal)150 – 600 W​
Bass AlignmentSealed
Port Tuning FrequencyN/A
Crossover FrequencyLF/MF: 825 Hz​, MF/HF: 3 kHz​
Drive Unit Complement2 x 6” RDT III Bass Driver, 1 x 4” RDT III Mid-Range Driver, 1 x MPD III Tweeter​​
External Dimensions (Including Grille and Terminals (H x W x D))1207 x 332 x 105.5 mm (47 9/16 x 13 1/16 x 4 4/16”)
Cut-Out Dimensions1175 x 300 x 97.5 mm (46 1/4 x 11 13/16 x 3 13/16”)
Weight27.7 kg (61 lb)

Product Features

  • 1 x MPD III high-frequency transducer for a larger, clearer, and more lifelike sound
  • 1 x 4” RDT III mid-bass driver for incredible levels of clarity and scale
  • 2 x 6” RDT III bass drivers for exceptional weight and depth
  • Patented 'DCF' (Dynamic Coupling Filter) mechanism for more natural sound
  • Bespoke speaker terminals and footings
  • Underhung, edge-wound voice coils: greater driver efficiency and lifelike dynamics, less distortion
  • Rigid cabinet construction made from 25 mm MDF with steel back
  • Extensive internal bracing using thick MDF cross bracing techniques

This site uses cookies. By continuing your visit, you accept their use as set out in our Cookie Policy. OK